Rockwell Automation 5370-CVIM2 Module - Manual (Page 13)

1 Chapter
1–1
Hardware Connection and Powerup Check
This chapter shows you how to connect the CVIM2 system components and
perform a powerup check.
The procedures in this chapter cover only those components that are related
to the CVIM2 machine vision system, namely:
•
CVIM2 module, Catalog No. 5370–CVIM2.
•
Pyramid Integrator chassis:
Four–slot chassis, Catalog No. 2801–NX3.
Eight–slot chassis, Catalog No. 2801–NX4.
•
Vision chassis, Catalog No. 2801–AM2
•
Chassis power supply, Catalog No. 2801–NX2.
•
RS–170 Video monitor: Color, 13–inch, rack–mounted, 115VAC,
Catalog No. 2801–N8.
•
VGA video monitor: Catalog No. 2711–M14; 2711–MT14.
•
Light pen, Catalog No. 2801–N7.
•
Camera, Catalog No. 2801–YC, –YD, and –YE.
•
Interface modules:
User interface box, Catalog No. 2801–N22.
User interface box, Catalog No. 2801–N26.
I/O interface box, Catalog No. 2801–N27.
Interface board, Catalog No. 2801–JMB.
•
Interconnecting cables.
Additional components may be required for some CVIM2 system
configurations. These will be identified in the connection procedures.
For complete information on installing the CVIM2 system in its factory floor
location, refer to the Allen–Bradley Pyramid Integrator Installation Manual,
Publication 5000–6.2.10, which is supplied with the Pyramid Integrator
chassis.
CVIM2 System Components