Rockwell Automation 5370-CVIM2 Module - Manual (Page 31)

Chapter 2
CVIM2 System Configuration: An Overview
2–8
Selecting Online Operation
Normally, your last step is to pick Go On–Line in the Environment menu.
This enables the system to perform online inspection operations, which will
begin immediately if the selected trigger source is active. During online
operations, you can observe the camera image and inspection tool display
and the inspection results data display at the same time.
When you pick Environment , the Environment menu appears, as shown in
the example in Figure 2.8.
Figure 2.8 Example: The Environment Menu
When you pick Go On–Line , the system displays the camera image and
tools, and the inspection results data. Figure 2.9 shows an example of this.
Figure 2.9 Example: Online Screen Display