Rockwell Automation 5370-CVIM2 Module User Manual
Page 282
Chapter 7
Inspection Tools
7–44
Figure 7.38 Example: Selecting Pick Target Panel
ЗЗЗЗЗЗЗ
ЗЗЗЗЗЗЗ
ЗЗЗЗЗЗЗ
When you pick one of the objects in the image field, the measurement results
values for that object appear in the right column of the
Pick Target
panel, as
illustrated by the example in Figure 7.39.
NOTE: The picked object’s border is highlighted in green when all of its
measurement results values lie within the limits selected for the active
measurement functions (that is, the measurement functions with “
Y
” selected
in the
Target
panel. See Figure 7.33 on page 7–37). The object’s border is
highlighted in red if any of these values lie outside a selected limit.
Figure 7.39 Example: Picking Contour to Get Measurement Data
ЗЗЗЗ
ЗЗЗЗ
You can use the
Pick Target
function to obtain and record the measurement
data from all of the appropriate objects. You can then return to the slide bar
panels for the active measurement functions and enter the appropriate
minimum and maximum limit values directly into the corresponding
Min
and
Max
fields.