Y_camscale, Parameters – Yaskawa MotionWorks IEC User Manual
Page 223
Advertising
PLCopenPlus Function Blocks for Motion Control 2013-04-13
215
Y_CamScale
This Function Block multiplies cam slave position data derived from the
cam table by a scale factor.
Parameters
Parameter
Data Type
Description
VAR_IN_OUT
B
Master
A logical reference to the master axis
B
Slave
A logical reference to the slave axis
VAR_INPUT
Default
B
Execute
BOOL
Upon the rising edge, all other
function block inputs are read and
FALSE
Advertising