Yaskawa MotionWorks IEC - Manual (Page 321)

PLCopenPlus Function Blocks for Motion Control 2013-04-13 313
limited (default) access.
app 3406 0002 The default login group for the web server was assigned to
a group which did not exist. Access control has been
disabled, because a minimal amount of access is required
in order to log in. The configuration file should be fixed
before continuing.
app 3406 0003 The web server configuration specified access control
should be enabled, but did not specify at least one path to
control access to. Access control has been disabled. The
configuration file should be fixed before continuing.
app 3407 0002 The base directory for configuration files was missing and
has been created automatically. The system has booted in
a minimal configuration mode, and most functionality is
limited. Please upload a new complete configuration file
set.
app 3407 0003 A required default configuration file was missing. A
minimal configuration for the corresponding component
has been loaded, and some functionality may be limited.
app 3407 0004 A required default configuration file was incorrectly
formatted. A minimal configuration for the corresponding
component has been loaded, and some functionality may
be disabled.
app 3407 0005 A configuration file specified by the user configuration file
set was incorrectly formatted. The corresponding default
configuration file is being used instead.
app 3407 0006 The file describing which configuration set to use was
corrupted. The default configuration set is being used.
app 3407 0007 An error occurred while writing a config file. The file
system may be full or damaged.
app 3407 0101 The configured RAM disk on the controller was unable to
be created.
app 3407 0102 Detected an unsupported option card inserted in the
controller.
app 3407 0104 Data in the controller SRAM did not match the expected
value. It should be treated as corrupted until it is re-
initialized.
app 3407 0106 The SRAM battery backup power failed. SRAM data should
be treated as corrupted until it is re-initialized.
app 3407 0107 The controller's time-of-day clock detected a voltage
decrease in the backup battery. The current time and date
is likely to be incorrect. This alarm can be cleared, but will
recur when the controller is powered ON until the time