Yaskawa MotionWorks IEC - Manual (Page 293)

PLCopenPlus Function Blocks for Motion Control 2013-04-13 285
Y_VerifyParameters
This Function Block compares the current parameters in the drive with the
parameter file stored in the controller via the MotionWorks IEC Hardware
Configuration.
Parameters
Parameter Data
type
Description
VAR_IN_OUT
B Axis AXIS_REF Logical axis reference. This value can be located on the
Configuration tab in the Hardware Configuration (logical axis
number).
VAR_INPUT Default
B Execute BOOL Upon the rising edge, all other function block
inputs are read and the function is initiated. FALSE