Mc_moveabsolute, Parameters – Yaskawa MotionWorks IEC User Manual
Page 94
Advertising
PLCopenPlus Function Blocks for Motion Control 2013-04-13
86
MC_MoveAbsolute
This Function Block commands a controlled motion to the specified
absolute position.
Parameters
Parameter
Data Type
Description
VAR_IN_OUT
B
Axis
Logical axis reference. This value can be located on the Configuration
tab in the Hardware Configuration (logical axis number).
VAR_INPUT
Default
B
Execute
BOOL
Upon the rising edge, all other
function block inputs are read and
the function is initiated. To modify
an input, change the value and
re-trigger the execute input.
FALSE
Advertising