Yaskawa MotionWorks IEC - Manual (Page 284)

PLCopenPlus Function Blocks for Motion Control 2013-04-13 276
Y_SetRTC
This Function Block allows the application program to set the controller's
real time clock.
Parameters
Parameter Data type Description
VAR_IN_OUT
B DateAndTime RTC_Struct Date and time
VAR_INPUT Default
B Execute BOOL Upon the rising edge, all other function block
inputs are read and the function is initiated. To
modify an input, change the value and re-trigger
the execute input. FALSE
VAR_OUTPUT
B Done BOOL Set high when the commanded action has been completed
successfully. If another block takes control before the action is
completed, the Done output will not be set. This output is reset when
execute goes low.
B Busy BOOL Set high upon the rising edge of the 'Execute' or 'Enable' input, and
reset if Done, CommandAborted, or Error is true.
B Error BOOL Set high if error has occurred during the execution of the function
block. This output is cleared when 'Execute' or 'Enable' goes low.