Lenze ECSCPxxx - Manual (Page 447)

Index 13
l
447 EDBCSXP064 EN 8.0
Installation, mechanical, 38
− push−through technique (ECSDx...), 41
Installation, mechanical
− cold−plate technique (ECSCx...), 45
− important notes, 38
− with fixing rails (ECSEx...), 40
Insulation resistance, 31
InTarget, 229
Interfaces to the control, 108
Internal brake resistor, Connection, 57
J
Jerk time, 99
Jitter, 278 , 279
K
Keypad XT EMZ9371BC
− changing and saving parameters, 264
− connecting the keypad, 260
− display elements, 261
− fault analysis, 337
− function keys, 263
L
L−profile, 99
LECOM, status word (C0150/C0155), 340
LEDs, 337
Legal regulations, 17
Liability, 17
Limit positions and limit switches
− hardware limit switches, 107
evaluation, 240
manual control to, 175
retracting, 176
− software limit positions, 107
manual control to, 175
monitoring, 237
Loading the Lenze setting, 125
Low−voltage supply, 13
M
Machine parameters, 103
− feed constant, 105
− gearbox ratio, 104
− max. acceleration/deceleration, 106
− motor revolutions, 103
− software limit positions, 107
− target position selection, maximum, 106
− traversing speed, maximum, 106
machine parameters, position resolution, 106
Mains fuses, 435
Malfunction of drive, 342
Manual jog (inching mode), setting, 101 , 121
ManualJog, 112
Manufacturer, 17
Max. acceleration/deceleration, 106
Max. system speed, monitoring functions, 322
MCTRL_MotorControl (motor control), monitoring,
absolute value encoder initialisation, 319
Measuring system for positioning, 102
Mechanical installation, 38
− cold−plate technique (ECSCx...), 45
− important notes, 38
− push−through technique (ECSDx...), 41
− with fixing rails (ECSEx...), 40
Message, 292
Modes for homing
− modes 0 and 1, 179
− modes 6 and 7, 182
− modes 14 and 15, 186
− modes 4 and 5, 182
− modes 8 and 9, 183