Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 101)

101
5. Configuring the Receiver Technical Reference Manual-4.0.0en
Use ALL (F5) to reveal System 300
antenna configurations also. You can
pick out the antenna configurations
that you will use the most and delete
the rest. All possible antenna
configurations may still be accessed
in the future by using the DEFLT and
ALL keys. Position
This screen defines the way in which
position is displayed. These settings
are mostly used for Real-Time Rover
setups.
Update Rate - Defines the rate at
which the position will be updated on
the display.
Coord Sys - You may also select a
coordinate system which will be used
to display the positions. The WGS84
coordinate system will always be
available and should be sufficient for
post-processed kinematic work. You
may define other coordinate systems
in Applications in Determine Coord
System (see section 11.1).
Further options are available on this
screen in Advanced mode. See
section 5.2.1 for details.
Highlight Coord Sys and press
ENTER to reveal the list of coordinate
systems currently available.
Select the coordinate system that you
wish to use.
Use NEW (F2) to define a new
coordinate system. Use EDIT (F3) to
edit a coordinate system. Use DEL
(F4) to delete the selected coordinate
system and INFO (F5) to reveal the
type of transformation used.