Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 385)

385 Appendix K Technical Reference Manual-4.0.0en
Configuration: Coding
The GS50 / GS50+ only allows
thematical coding.
For this reason, the panel cannot be
exited with CONT (F1) if no codelist is
available. You can define a new
codelist or load a configuration file
from the PC-Card.
This change applies from chapter 5.1
to 5.4.
Configuration: Stake-Out
The Stake-Out Configuration is
available under the name
Navigation.
The STORE -> Job configuration
option when staking from an ASCII
file stake points is not available.This
applies to chapter 5.4.
Configuration: Point Template User
Mask
The configuration of the Cursor Pos
is not used in the GIS Data Collection
program, although it can be
configured on the GS50 / GS50+.
This change applies to chapters 5.2
and 5.4.
The use of the Point Template mask
differs for the GIS Data Collection
program and the Survey program. For
this reason, the working examples
given in chapters 5.2 and 5.4 do not
apply to GS50 / GS50+.
Time and Date templates can be
configured with EDIT (F3) to use
either the Code or the Sensor ID as
the prefix for the Point ID.