Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 155)

155
5. Configuring the Receiver Technical Reference Manual-4.0.0en
EAO (F3) allows the default method
to be set that will be used to enter an
External Angle Offset when
measuring hidden points
using a
device that measures azimuths.
The options are None, Permanent or
New For Each Point. If permanent is
chosen a default EAO can also be
entered.
If None is chosen it will not be
possible to enter an EAO during the
measurement of hidden points.
Press CONT (F1) to continue.
Seismic
You can set whether or not to store a
seismic record with each point. If Use
Seismic Record is set to YES,
the seismic records for manually
occupied points are stored in point
annotation #4. The same holds true
for auto logged points as long as
Store Pt DB and Use Annot in panel
CONFIGURE\ Position Logging are
set to YES. For detailed information
see section 5.4.
The format for seismic records is
given in Appendix C.
Press CONT (F1) to complete the
configuration.