Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 360)

360 Appendix H Technical Reference Manual-4.0.0en
Using Telemax
Once you have set the configuration
for your GSM phone or the Modem
and selected the Telemax service you
can establish the connection to the
SAPOS station by pressing SHIFT-
CONEC (F4) in the MAIN, SURVEY
or STAKE-OUT panel.
Based upon the Account file the
Telemax software checks if you have
the right to receive uncoded RTCM
corrections from the SAPOS station.
To disconnect again press SHIFT-
DISCO (F4) in the MAIN, SURVEY or
STAKE-OUT panel.