Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 270)

270 10. Status Technical Reference Manual-4.0.0en
The last 5 codes that have been used
from the current codelist are
displayed. Should you select a
different codelist for use, this log will
be cleared.
Pressing INFO (F5) reveals the time
at which the code was recorded.
The last 100 messages displayed on
the terminal are listed in order of time
(most recent first). This log can only
be deleted by pressing DEL-A (F4).
Pressing INFO (F5) reveals the time
and date that the message appeared.
10.9 Memory/Battery Status
Press cursor down.
PC-Card - Amount of memory
remaining on the PC-card.
Memory Int - Amount of memory
remaining on the internal memory.
Battery A - amount of charge remain-
ing in internal battery A.
Battery B - Amount of charge re-
maining in internal battery B.
10.8 Message Log Status 10.7 Code Log Status