Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 235)

235 8. Coding Technical Reference Manual-4.0.0en
Layers, Codes and Attributes can be
added to a Codelist. When a
Thematical Codelist has been se-
lected, the CODES (F3) and LAYER
(F5) keys will be available.
To create a new Layer or activate/
deactivate an existing Layer press
LAYER (F5).
8.1.3 Defining and Activating/Deactivating Layers
Press NEW (F2) to create a new
layer. Input the Layer name and press
CONT (F1).
To activate/deactivate individual
Layers, select the Layer and press
USE (F4) to toggle the Layer on/off.
To deactivate all Layers, press NONE
(F5). This key then changes to ALL
(F5). Use this to activate all the
Layers.