Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 203)

203 7. Measuring with System 500 Technical Reference Manual-4.0.0en
Chainage and Offset, height
excluded
If the height computation for a
hidden point has been enabled
within the configuration, the follow-
ing options apply in addition to
those on the previous page.
Delta Hgt - Height difference
between the center of the external
device and the aimed point. De-
vices with inclinometer like the
Laser Locator will transfer the
measured height difference auto-
matically into this field as long as
Include Hgt in the panel CONFIG-
URE\ Hidden Point is set to YES.
When working with devices without
inclinometer the height difference can
be estimated and typed in manuallly.
Use the I/T H (F4) key to check or
enter the instrument height at the
standpoints A and B and target
heights.
The default values as defined in the
configuration are displayed but can
be edited. Use the DEFLT (F5) key to
reveal the default values again.
Trgt Height will only be available if
the settings have been done accord-
ingly in the configuration. Otherwise,
only the instrument height will be
taken into account.
CONT (F1) to return to the previous
panel and continue with the calcula-
tion of the hidden point.
For further information on the Hidden
Point application and configuration
refer to Appendix H as well as chap-
ter 5.4.1.