Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 307)

307 12. Utilities Technical Reference Manual-4.0.0en
12. Utilities
The Utilities menu item is revealed by
pressing SHOW (F4) from the Main
Menu.
Utilities contains file, memory and
security utilities.
The directory of the currently se-
lected memory device is displayed.
If an internal memory is fitted,
DEVCE (F5) will be available. Use
this to access the directory of the
internal memory.
To enter a directory, highlight it and
press ENTER. To move up a level
out of a sub-directory, highlight the
double points and press ENTER.
CODE - Contains all codelist files.
CONVERT - Contains all format files
defined in Format Manager.
DTM - Contains any DTM stakeout
file to be used with this application.
12.1 Directory of Memory Device
DATA - Contains user defined ASCII
files including the line definition file
STK_Line.txt as well as the sub-
directory GPS. GPS contains any
almanac files that have been trans-
ferred from the Receiver as well as
the GEOID, the CSCS and the
RINGBUF sub-directory. GEOID
contains any Geoidal Model files,
CSCS contains any CSCS Field Files
and RINGBUF contains any Ring
Buffer Data files.
GEODB - Contains all Job files
including GPS raw data and point
information.
GPS - Contains any coordinate
system files transferred from the
Receiver as well as the sub-directo-
ries CONF and PROG. CONF
contains any configuration set files
transferred from the Receiver. PROG
contains Receiver firmware and text
files.