Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 358)

358 Appendix H Technical Reference Manual-4.0.0en
Ref Select - Choose the criterion by
which the Reference Station shall be
selected.
Choose Profile to select the refer-
ence station according to the given
profile.
Choose Frequency to select the
reference station according to a
frequency different to the given
profile. The Frequency has to be
manually specified.
Choose Phone No to select the
reference station according to a
phone number different to the given
profile. The Phone No has to be
manually specified.
Choose Station No to select the
reference station according to a
station number different to the given
profile. The Station No has to be
manually specified.
Viewing the Status of SMARTgate
To access the SMARTgate status
press STATUS /Interfaces, highlight
the SMARTgate device and press
DEVCE (F5).
Profile - Displays the selected User
Profiles.
Profile No - Displays the number of
the selected profile.
Medium - Displays the currently used
medium. This may be either GSM,
2m Radio or None.
Error Rate - Displays the error rate of
the currently active medium (0...99%).
Press ACCNT (F3) to display the
currently used Account, its Provider,
the currently used Service (e.g. EPS
or HEPS) and the Credit Unit and
Credit Time.
CreditUnit - Displays the remaining
credit units.
CreditTime - Displays the time
remaining according to the credit
units.
Press VERS (F4) to display the Type
and the Serial No. of the SMARTgate
box, the Software Version and its
Software Date.
Using the SMARTgate box
Once you have set the configuration
for the SMARTgate box the connec-
tion to the SAPOS station can be
established by pressing SHIFT-
CONEC (F4) in the MAIN, SURVEY
or STAKE-OUT panel. To disconnect
again press SHIFT-DISCO (F4).