Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 304)

304 11. Applications Technical Reference Manual-4.0.0en
Press DEL (F4) to delete an seg-
ment.
To finish the area definition and start
the calculation press CALC (F1). The
last point is automatically joined with
the first point of the definition and the
result is displayed.
The units as set in CONFIGURE
\General\Units are used to display the
results.
Press LIST (F3) or ESC to return to
the Create Area screen and modify
the area definition.
PLOT (F5) displays a praphical
screen showing the outline of the
defined area.
Press CONT (F1) to return to the
APPLICATION\ Menu.
This application allows a line to be
created and then this line can be
segmented creating any number of
points along this line. These points
can then be staked out if required.
Access the Line Division application
from the Application menu.
Choosing this application leads to the
LINE DIV\ Begin panel.
11.8 Line Division