Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 316)

316 13. Transfer Technical Reference Manual-4.0.0en
Enables you to transfer Geoid Field
Files between Sensors and PC
Cards.
Select From where you wish to
transfer the Geoid Field File. The
device To which the Geoid Field File
will be transferred will be
automatically selected.
If you transfer a Geoid Field File
From the PC-Card To the Sensor
then a Geoid model will be
automatically created.
Geoid File - Select the Geoid Field
File. Press ALL (F3) to select all the
Geoid Field Files.
13.8 Geoid Field File
Enables you to transfer CSCS Field
Files between Sensors and PC
Cards.
Select From where you wish to
transfer the CSCS Field File. The
device To which the CSCS Field File
will be transferred will be
automatically selected.
If you transfer a CSCS Field File
From the PC-Card To the Sensor
then a CSCS model will be
automatically created.
CSCS File - Select the CSCS Field
File. Press ALL (F3) to select all the
CSCS Field Files.
13.9 CSCS Field File
Enables you to transfer Receiver
firmware from the PC Card to the
Sensor.
Version - Select the firmware version
that you wish to transfer.
Note that for PC Card capacity
reasons, the firmware is available in
separate sections as well as one file.
This enables different sections to be
uploaded via the PC Card if the
complete file will not fit on the PC
Card.
13.10 Firmware