258 9. the config key – Leica Geosystems GPS System 500 - Technical Reference Manual User Manual
Page 258
Advertising
258
9. The CONFIG Key
Technical Reference Manual-4.0.0en
The ASCII message takes the following format:
$PLEIR,EIX,ssssssss,tttttttt,nnnn,cccc,dddd*hh<CR><LF>
Format Content
$PLEIR,
Header
EIX,
Message identifier = event input “1” or “2”
sssssssss,
GPS time of week of event (in msec)
tttttttt,
GPS time of week of event (sub msec in nsec)
nnnn
GPS week number
cccc
Event count
dddd
Event pulse count
1
*hh
Check sum
<CR>
Carriage return
<LF>
Line feed
1
This is the count of all pulses including those violating the specified time
guard boundary conditions. This allows determination of missed events.
Advertising