Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 288)

288 11. Applications Technical Reference Manual-4.0.0en
By pressing STAKE (F6) you may
select an additonal stake out filter.
The options No Filter, Points to Stake
and Staked Points are available.
When you have set the required Filter
press CONT (F1) to continue.
11.4 Calculator
The Calculator functions according to
the RPN principle. This has the
advantage that complicated
calculations require less keystrokes.
It is available for any calculation you
wish to make.
11.5 Wake-up Sessions
You may program the Receiver to
automatically start, measure and then
shut down again without any
interaction from an operator. You may
define several Wake-Up Sessions in
order that the Receiver will make
several measurements automatically
one after the other.
Select Wake-up Sessions from the
APPLICATION menu.