Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 267)

267 10. Status Technical Reference Manual-4.0.0en
Information about the satellites is
given.
Sat - The PRN number of each
observed satellite is given.
Elev - The elevation of the satellite
above the horizon is given together
with the direction in which it is moving
(rising or setting).
Azi - The azimuth of the satellite is
given.
SN1 & SN2 - The signal to noise ratio
on L1 (SN1) and L2 (SN2) is given.
QI1 & QI2 - The quality indicator of
the phase measurement reconstruc-
tion is given for L1 (QI1) and L2 (QI2). TRACK (F2)
Allows toggling between elevation/
azimuth and tracking/searching
information.
Sat - The PRN number of each
observed satellite is given.
L1 & L2 - The tracking status of each
satellite. TR = Tracking, SH = search-
ing.
SN1 & SN2 - The signal to noise ratio
on L1 (SN1) and L2 (SN2) is given.
QI1 & QI2 - The quality indicator of
the phase measurement reconstruc-
tion is given for L1 (QI1) and L2 (QI2).
10.5 Satellite Status