Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 74)

74 4. TR500 Terminal Overview Technical Reference Manual-4.0.0en
4. TR500 Terminal Overview
The TR500 Terminal performs three main functions:
1. Program the GPS Receiver
2. Enable input of information to the GPS Receiver
3. Display information from the GPS Receiver
The Terminal must be connected to the GPS Receiver to function. It can be
connected using a cable or mounted directly onto the receiver.
Once connected, the Terminal and Receiver can be switched on using the ON/
OFF key on the Terminal.
A GHT28 handstrap/beltclip is available which fits on the rear of the Terminal.
This improves handling of the Terminal in applications where it is held con-
stantly in the hand. (E.g. GIS applications).
TR500 Terminal attached to GPS Receiver
with cable