Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 83)

83
4. TR500 Terminal Overview Technical Reference Manual-4.0.0en
4.4 General Operating Principles
There are several conventions used
in the user interface of System 500. 2. Entering Data
At times you will have to enter Point
Ids, Names etc. Enter the data using
the keyboard and press the Enter key.
Special characters such as д, б, з
etc. can be entered using the
alphanumeric input. When the
character you wish to input is not on
the keyboard, press the Enter key.
The F1-F6 keys will then contain 5
characters on each. Press the key
that contains the character you
require. The F1-F6 keys will then
contain one of each of the five that
you selected. Use the up and down
cursor keys to scroll through all the
possible characters. Press the key
that corresponds to the character you
require.This will then be entered. The
extra characters that are available for
use can be configured in the
Configure menu.
1. Function Keys
F1-F6 function keys appear below six
bars on the screen. These bars will
appear with commands in them on
each screen. To execute the com-
mand, press the corresponding
function key.