Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 175)

175 7. Measuring with System 500 Technical Reference Manual-4.0.0en
Adding Meteorological Data
Meteorological data may be required
when very precise work is being
carried out or when very different
weather conditions exist between the
Rover and Reference. When carrying
out post-processed kinematic work, it
only makes sense to input
meteorological data at distinct points,
(not during the moving parts). This
data will not be used by SKI-Pro but
may be exported in RINEX format
from SKI-Pro and used in a scientific
processing software that accepts
meteorological data for tropospheric
modelling.
Select Meteorological Data from the
list and press CONT (F1).
Enter the data and press STORE
(F1). The data will be stored with a
time tag. During long observation
periods you may need to store
several sets of meteorological data as
the weather changes.
Adding Point Annotations
Point Annotations may be used as an
electronic notepad where events,
notes etc. may be written. They are
then taken with the Point Id
information into SKI-Pro. Point
Annotations may only be added when
a distinct point is being recorded.
To add Point Annotations, select
Point Annotations from the list and
press CONT (F1).
You may type in 4 notes with up to 26
characters in each note. Press CONT
(F1) when you are finished.
Press CLEAR (F6) to delete the
content of all fields.