Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 210)

210 7. Measuring with System 500 Technical Reference Manual-4.0.0en
7.5.3 The Stake-Out Screen
When Stake-Out has been started, the following screen appears:
1
2
3
4
5
1. Orientation - Defines the direction
on which the Range Information (3) is
based.
2. Target Point - The current point for
which the Range Information (3) is
shown.
3. Range Information - The range to
the currently selected point. May be
one of two formats:
Orthogonal - Range In/Out and
Offset Left/Right plus Cut/Fill.
Polar - Range In/Out and Bearing
plus Cut/Fill.
4. Quality - The quality of your
current position.
5. Graphics panel - Shows your
current position (a cross) relative to
the Target Point (central circle). The
scale changes depending on your
proximity to the target.