Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 113)

113
5. Configuring the Receiver Technical Reference Manual-4.0.0en
Logging
In addition to the functionality given in
Standard mode, you can also specify
the observables to be recorded and
access further functionality via the
FILES (F6) key (not on the GS50/
GS50+).
Observables - Defines what is
recorded in the raw GPS data.
Extended records extra observables
including the Doppler observable. Full
details of what is recorded in each
mode is given in Appendix D.
Pressing the FILES (F6) key enables
you to configure further options.
Log File Segments will split up the
recorded data into files of a specific
length unless 1 File is selected. If a
time is selected the option Split
Tracks will become available. Select
No will only record data into a new file
if the time is reached and a new track
is observed.
Auto Del Log Files will delete the
recorded data after the specified
length of time unless Never is se-
lected.
Press CONT (F1) to return to
CONFIGURE\Logging.
Occupation Settings
Additional functionality available in
this panel over Standard mode is
Auto OCUPY, Auto Stop, STOP P-
PRC and END Survey.
Auto OCUPY - will automatically
occupy the point as soon as the
survey is started. Timed is chosen for
automatic point occupations at a
certain time. The time is specified in
the SURVEY panel.
Auto Stop - will automatically stop
the measurements according to the
setting in the STOP P-PRC function.
The measurements stop when the
criteria for the setting reach 100%.