Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 180)

180 7. Measuring with System 500 Technical Reference Manual-4.0.0en
When the Advanced Mode is se-
lected, the ADD (F5) key is available.
This key can be used to add Meteo-
rological Data.
Press ADD (F5), followed by CONT
(F1)
Meteorological data may be required
when very precise work is being
carried out and/or when very different
weather conditions exist between the
Rover and Reference. This should
only be used when recording data for
post-processing. This data will not be
used by SKI-Pro but may be exported
in RINEX format from SKI-Pro and
used in a scientific processing
software that accepts meteorological
data for tropospheric modelling.
Select Meteorological Data from the
list and press CONT (F1).
Enter the data and press STORE
(F1). The data will be stored with a
time tag. During long observation
periods you may need to store
several sets of meteorological data as
the weather changes.
7.3.2 Using the ADD key