Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 194)

194 7. Measuring with System 500 Technical Reference Manual-4.0.0en
When the Advanced Mode is
selected, the ADD (F5) key is
available.
This key can be used to add Point
Annotations, Meteorological Data and
Hidden Points.
Press ADD (F5)
Adding Point Annotations
Point Annotations may be used as an
electronic notepad where events,
notes etc. may be written. They are
then taken with the Point Id
information into SKI Pro.
To add Point Annotations, select
Point Annotations from the list and
press CONT (F1).
You may type in 4 notes with up to 26
characters in each note. Press CONT
(F1) when you are finished.
Press CLEAR (F6) to delete the
content of all fields.
Adding Meteorological Data
Meteorological data may be required
when very precise work is being
carried out or when very different
weather conditions exist between the
Rover and Reference. When carrying
out Real-Time Rover work, it only
makes sense to input meteorological
data when recording data for post-
processing as well as recording
points in real-time. The
meteorological data should be
entered at distinct points, (not during
the moving parts). This data will not
be used by SKI-Pro but may be
exported in RINEX format from SKI-
Pro and used in a scientific
processing software that accepts
meteorological data for tropospheric
modelling.
Select Meteorological Data from the
list and press CONT (F1).
7.4.9 Using the ADD key