Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 339)

339 Appendix H Technical Reference Manual-4.0.0en
RS232
Port 1, 2 and 3 of the Sensor are
standard RS232 interfaces. If you are
using an external device that is not
directly supported you may use the
default RS232 configuration.
By default a standard RS232 device
is available in the list.
RS232 - Standard parameters with
9600 baud rate.
To create a new standard RS232
device highlight RS232 and select
NEW (F2).
Enter a name and change the para-
meters according to the specification
of your external device.
Press CONT (F1) to store the device.