Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 94)

94 5. Configuring the Receiver Technical Reference Manual-4.0.0en
Occupation Settings
These settings control the way in
which points are occupied and
recorded.
OCUPY Mode - Sets the way in
which coordinates will be recorded for
a point. For Static, Rapid Static and
Post-processed Reference Station
applications Normal only will be
available.
This means that observations will be
recorded until the STOP key is
pressed. The last observation that is
recorded is the one that expired
directly before STOP was pressed.
Auto Store - Allows you to
automatically store a point after the
STOP key has been pressed.
Further options are available on this
screen in Advanced mode. See
section 5.1.1 for details.
Id Templates
An Id template is used to pre-define a
Point Id. This feature is mainly used
in post-processed and real-time
kinematic operations where many
points are collected quickly. For
Static, Rapid Static and Real-Time
Reference operations, set all fields to
No template used.
Further options are available on this
screen in Advanced mode. See
section 5.1.1 for details.
Press CONT (F1) to complete the
configuration. You will return to the
Main Menu.