Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 102)

102 5. Configuring the Receiver Technical Reference Manual-4.0.0en
When NEW (F2) is pressed, the
following screen appears.
Coord Sys - Defines the name of the
new coordinate system.
Further information about Coordinate
Systems is given in Chapter 11.
When you have set the parameters
press CONT (F1) to return to the
CONFIGURE\Position screen.
When using EDIT (F3) the same
descriptions apply.
Press CONT (F1) to return to the
CONFIGURE\Position screen.
Formats
You can configure the way in which
information is presented when sur-
veying.
Format Grid - The format of grid
coordinates if they are being used.
Format Geodetic - The format of
geodetic coordinates if they are being
used.
Quality Type - The way in which the
quality of a position is displayed in the
Main Survey screen. This is Hard-
wired to DOP for Post-processed
Kinematic Configurations.
It will display a Dilution of Precision
according to the components defined.
Defined by - Defines the components
used to calculate the DOP. The
definitions of the DOP are as follows:
Height - VDOP
Pos - HDOP
Pos + Hgt - PDOP
Pos + Hgt + Time - GDOP
OCUPY Counter - Defines how the
length of time spent occupying a point
is displayed. Select from Time -
normal time or Observations - the
number of observations recorded.