Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 269)

269 10. Status Technical Reference Manual-4.0.0en
A log of all points in the currently
selected job is displayed in order of
time.
Further information is available by
pressing the INFO (F5) key.
The column Crd Source appears and
displays the source of the coordinates
for each point.
Calculated - calculated from other
sets of coordinates. E.g. via COGO
routines or averaged.
GPS Navigtd - GPS navigated
position.
PPRC Code - Post processed GPS
code only.
10.6 Point Log Status
PPRC flt ph - Post processed GPS
phase float position (ambiguities not
resolved).
PPRC fix ph - Post processed GPS
phase. Ambiguities fixed.
RTME Code - Real Time GPS
position code only.
RTME fix ph - Real-Time GPS phase
position. Ambiguities fixed.
GPS RTCM - Real Time GPS
position from RTCM code corrections.
Unknown - Unknown source.
User enterd - coordinate entered by
user.
Pressing INFO (F5) again reveals the
CQ (coordinate quality) in and the
coordinate class. The coordinate
class may be either:
MEAS - Point measured once
AVRG - Point measured more than
once and coordinates averaged.
CTRL - Point user entered or held
fixed with no accuracy matrix.
REF (F6)
This key is available when the Re-
ceiver is configured as a real-time
rover.
Pressing this key gives information
about the satellites being tracked at
the Reference station.