Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 78)

78 4. TR500 Terminal Overview Technical Reference Manual-4.0.0en
Position Mode
Static - the GPS Antenna
should be held stationary.
Moving - The GPS Antenna
may move.
The Position Mode is governed by the
type of operation defined in the
Configuration.
No. Visible Satellites
The number of theoretically visible
satellites according to the current
almanac are displayed.
When the Track Mode is set to
MaxTrak this will be indicated
with a little “T” being added to
the icon.
No. Satellites used on L1/L2
When an Accuracy Status icon is
displayed the number of satellites
currently used for the position compu-
tation are shown. Satellites that are
tracked but with a poor signal quality
are not shown.
When no Accuracy Status icon is
displayed the number of tracked
satellites are shown, irrespective of
the signal quality.