Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 92)

92 5. Configuring the Receiver Technical Reference Manual-4.0.0en
Formats
You can configure the way in which
information is presented when
surveying.
Format Grid - The format of grid
coordinates if they are being used.
Format Geodetic - The format of
geodetic coordinates if they are being
used.
Quality Type - The way in which the
quality of a position is displayed in the
Main Survey screen. This is Hard-
wired to DOP for Static/Rapid Static
Configurations. It will display a
Dilution of Precision according to the
components defined.
Defined by - Defines the components
used to calculate the DOP. The
definitions of the DOP are as follows:
Height - VDOP
Pos - HDOP
Pos + Hgt - PDOP
Pos + Hgt + Time - GDOP
OCUPY Counter - Defines how the
length of time spent occupying a point
is displayed. Select from Time -
normal time or Observations - the
number of observations recorded.
Coding
If you wish to select a coding system
press ENTER and choose from
Thematical or Free coding. Complete
descriptions of the coding systems
used by System 500 are given in
Chapter 8.
Press CODES (F3) to review the
codes in the chosen codelist. You
may also edit the codelist here.