Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 124)

124 5. Configuring the Receiver Technical Reference Manual-4.0.0en
5.3.1 Advanced Operation Mode for Real Time Reference Stations
The Advanced Mode contains extra
configurable parameters that may be
required for certain specialized
applications.
Select Advanced in
CONFIGURE\Operation Mode.
Only the screens that differ from
those seen in Standard Mode are
described here.
Position
In addition to the functionality given in
Standard mode, details about the
chosen coordinate system are given.
Residuals - The method by which
residuals will be distributed through-
out the transformation area is dis-
played.
Transform - The name of the trans-
formation set used is displayed.
Ellipsoid - The name of the local
ellipsoid is displayed.
Projection -The name of the projec-
tion used is displayed.
Geoid Model - The name of the
geoid model used is displayed.
CSCS Model - The name of the
CSCS model used is displayed.
Note that the details that are dis-
played depend upon the type of
transformation used. Certain types of
transformation do not use all of the
described parameters to calculate
local coordinates.