Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 277)

277 11. Applications Technical Reference Manual-4.0.0en
Use INFO (F5) to see where the
geoid model is stored, which ellipsoid
the model is based on and the date
and time of creation.
Use SHIFT + PARAM (F5) to view the
parameters defining the Geoid Model
Field File.
Press CONT (F1) to return to
COORDSYS\Type Selection.
For detailed information on Geoid
Models, please refer to the SKI-Pro
Online Help.
Use INFO (F5) to see where the
CSCS model is stored and the date
and time of creation.
Use SHIFT + PARAM (F5) to view the
parameters defining the CSCS Model
Field File.
Press CONT (F1) to return to
COORDSYS\Type Selection.
For detailed information on CSCS
Models, please refer to the SKI-Pro
Online Help.
Press CONT (F1) to proceed.
CSCS Model Field Files can be
exported from SKI-Pro onto the PC-
card or internal memory in the
Data\GPS\CSCS sub-directory.They
can either be transfered to the
System RAM or be read directly from
the PC- card.
Use PCARD (F2) to update the list
with CSCS Model Field Files existing
on the PC-card.
CSCS Model - If a CSCS Model is to
be applied, press ENTER and select
it from this list.