Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 139)

139
5. Configuring the Receiver Technical Reference Manual-4.0.0en
Id - Displays the way in which the
template is currently configured. You
may also enter any standard text here
that you would like to see in the Id
Template. (In this example the
standard text is the word “Point”. The
# symbols indicate automatically
incrementing numbers).
Num Start - Defines the start position
of any automatically incrementing
number.
Num End - Defines the end position
of any automatically incrementing
numbers.
Auto Inc - Defines whether the
number will increment automatically
at subsequent points.
Num Inc defines the amount by
which any automatically incrementing
number will increment.
Cursor Pos - Defines the position at
which the cursor will start at.
Press CONT (F1) until you return to
the CONFIGURE\ Id Templates
screen.
Further options are available on this
screen in Advanced mode. See
section 5.4.1 for details.