Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 233)

233 8. Coding Technical Reference Manual-4.0.0en
Codelists can be transferred to the
PC Card or Internal Memory using the
Transfer function in SKI-Pro.
Codelists on the PC Card or Internal
Memory must then be transferred to
the Receiver using the Transfer
function.
The Codelist is then selected for use
in Configuration.
Coding Type - Choose Thematical.
Codelist - Select the codelist from
the list or, to define a new codelist,
press ENTER.
8.1.1 Importing, Selecting and Defining a Thematical Codelist
The Codelists on the Receiver are
displayed. To create a new, empty
Codelist press NEW (F2).
Enter the Name of the new Codelist
and if required the name of the
Creator. Press CONT (F1).