Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 84)

84 4. TR500 Terminal Overview Technical Reference Manual-4.0.0en
Working Example
Application - Entering a special character.
Technique - N/A
Requirement - You need to enter the Job name “Cézanne”. All the charac-
ters are contained on the keyboard except “é”.
Field Procedure - The “C” is entered. To select the “é”, press F1. The
function keys will then change as follows:
Press F3 to select the “é”.
3. Selecting items from list boxes
At times you will have to select an
item from a list box. This could be a
point Id, Job, code etc. There are two
types of list boxes.
1. The list box appears as the
whole screen.
2. An item appears with an arrow
next to it indicating a drop down
list box.
When a list box appears on the whole
screen, a search field will appear in
the directory line with a blinking
cursor. If you know the name of the
item you are search for you may type
in the first few letters. The item(s) that
match what you type will be automati-
cally highlighted. This is case sensi-
tive. List boxes that contain more
lines than is possible to fit on the
screen have a scroll bar at the side.
This indicates your position within the
list.