Leica Geosystems GPS System 500 - Technical Reference Manual User Manual
Page 157
157
6. Jobs
Technical Reference Manual-4.0.0en
Editing a Job
To edit an existing Job press EDIT
(F3). The Job Name, Description,
Creator and Device are displayed
and are available for editing.
Deleting a Job
To delete a Job, select the Job and
press the DEL (F4) key. You will be
asked for confirmation before the Job
is deleted. All points and data con-
tained in the Job will be lost.
Selecting the Device
Jobs may be stored on the PC-Card
or the Internal Memory if fitted. To
change the device viewed, press the
DEVCE (F5) key.
Creating a New Job
Press NEW (F2) to create a new Job.
Name - Defines the Job name. The
name may be up to 16 characters
long and may include spaces.
Description - A description of the job
can be entered. This could be for
example, work to be performed or the
type/class of points contained in the
job. (Optional)
Creator -The name of the person that
created the job may be entered.
(Optional).
Device - Sets the device upon which
the Job is stored. Note that Internal
Memory is not fitted as standard and
therefore may not be an option.
Press CONT (F1) to confirm the entry
and return to JOB\PC-Card or
JOB\Internal.