Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 93)

93
5. Configuring the Receiver Technical Reference Manual-4.0.0en
Real-Time
For Static or Rapid Static post-
processing operations select None
and press CONT (F1). Logging
Log Static Obs - Switches logging on
or off when the Receiver is in Static
mode. The receiver has to be
stationary.
Obs Rate - The rate at which
observations will be logged. For Static
observations over long baselines and
long periods of time 15-30 seconds is
a reasonable rate. For Rapid Static
applications, 10-15 seconds is
normally used. For Reference
stations for post-processed and real-
time kinematic rovers, the rate should
be set the same as at the Rover.
Log Moving Obs - Only available
when Log Static Obs = YES. Sets
the observation rate when the
receiver is in Moving mode. This is
only used in Real-Time kinematic and
Post-Processed kinematic operations.
Log Auto Positions - Will
automatically log positions at a
specified rate. This is mostly used for
real-time rover operations.
See
section 5.4 for details.
Press CONT (F1) to continue to the
next screen.
Further options are available on this
screen in Advanced mode. See
section 5.1.1 for details.