Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 106)

106 5. Configuring the Receiver Technical Reference Manual-4.0.0en
Id Templates
An Id template is used to pre-define a
Point Id. This feature is mainly used
in post-processed kinematic and real-
time kinematic operations where
many points are collected quickly.
When set up correctly it will save you
having to type in the Point Id at each
point.
OCUPY Pts - Displays the Id
template selected for use with
manually recorded points.
Auto Log Pos - Displays the Id
template selected for use with
automatically recorded points.
Select the template that you wish to
use. Press ENTER to reveal the list of
available templates.
In this panel two default templates are
displayed and also a template that a
user has previously defined.
Inc stands for Increment and denotes
the amount by which any specified
number will increment at each point.
Crsr stands for Cursor and denotes
the character number at which the
cursor will be automatically placed.
The arrow means that this
template is set to operate in the
Remain Running mode.
No Template Used - if this option is
selected the last Point Id entered in
the Survey panel will be displayed.
The Point Id will be automatically
incremented if that Point Id contains
any numerical characters.
If you overtype this Point Id the auto
increment will start from the new
Point Id.
Time and Date - will automatically
use the current local time and date as
the Point Id.
Point ##### - automatically writes
the word “Point” followed by an
automatically incrementing 5 figure
number (denoted by #).