Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 82)

82 4. TR500 Terminal Overview Technical Reference Manual-4.0.0en
4.3 Keyboard
The Terminal keyboard is a QWERTY
layout designed for use in temperture
extremes and also for gloved hands if
necessary.
The six keys F1-F6 at the top of the
keyboard correspond to the six
softkeys that appear on the screen
when the Terminal is activated.
Pressing Shift followed by F1 will
always activate the Help screen.
Pressing Shift followed by F6 will quit
the Help and return you to the screen
you were on.
Alternatively, pressing Shift followed
by F6 will quit Survey, Stake Out or
Application.
Use the Esc key to step back to the
previous screen at any time.
Use the key combination Alt + L to
lock and unlock the terminal.
Use the key combination Alt + B to
switch the screen illumination on and
off.
Use the Shift key when the Shift
symbol is displayed to reveal further
choices on the softkeys F1-F6.
Use the CONFIG key to enter the
Configuration menus at any time.
The CE key is used to clear the last
character entered when entering
names, numbers etc. into the Re-
ceiver.
Use the ENTER key to confirm an
entry into the system.
Use the STATUS key to access
status information at any time.
Use the Cursor keys to move around
the screen.
The keys F7-F10 are user definable
function keys. They can be defined to
execute commands or access any
screen of your choosing. See section
9.4.