Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 238)

238 8. Coding Technical Reference Manual-4.0.0en
Codes can be added to a Codelist.
When Free Coding has been se-
lected, the CODES (F3) key will be
available.
To create new Codes press CODES
(F3).
Press NEW (F2).
Free Code - Input the identifier
Description - Input the description of
the Indentifier.
Press C-INF (F4) to add information
blocks for the code.
Enter a meaningful name for the info
block. Then move to the adjacent
field to enter a default value.
8.2.2 Defining New Codes
Use the NEW (F2) key to add more
information blocks.
Press CONT (F1) to continue.
The new code is displayed in the list.
An asterisk at the end of the line
indicates that the codes has
information blocks defined. Press C-
INF (F4) to view and if required add
information blocks.
Press CONT (F1) to continue.