Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 138)

138 5. Configuring the Receiver Technical Reference Manual-4.0.0en
Id Templates
An Id template is used to pre-define a
Point Id. This feature is mainly used
in post-processed kinematic and real-
time kinematic operations where
many points are collected quickly.
When set up correctly it will save you
having to type in the point Id at each
point.
OCUPY Pts - Displays the Id tem-
plate selected for use with manually
recorded points.
Auto Log Pos - Displays the Id
template selected for use with auto-
matically recorded points.
Select the template that you wish to
use.
Press ENTER to reveal the list of
available templates.
Inc stands for Increment and denotes
the amount by which any specified
number will increment at each point.
Crsr stands for Cursor and denotes
the character number at which the
cursor will be automatically placed.
The arrow means that this tem-
plate is set to operate in the Remain
Running mode.
No Template Used - if this option is
selected an automatically
incremented Point Id of the last
entered Point Id will be displayed in
the Survey panel. If you overtype this
Point Id the auto increment will start
from the new Point Id.
Time and Date - will automatically
use the current local time and date as
the Point Id.
To define your own Id Template press
NEW (F2).
Pt Id. Mode - Is the Mode how the Pt
Template will be used. If you select
Remain Running and you enter a
Point Id manually in the Survey panel
the new Point Id will be used as the
new Id Template and the following
Point Id’s will be based on this new
Template. If you select Change to
Indiv. and then enter a Point Id
manually in the Survey panel the
Point Id will return to the Id Template
as it is defined.