Leica Geosystems GPS System 500 - Technical Reference Manual - Manual (Page 354)

354 Appendix H Technical Reference Manual-4.0.0en
Press RTCM (F6) to set the RTCM
version and the number of bits/byte.
Press CONT (F1) to continue.
In CONFIGURE\ Interfaces highlight
Real-Time and press CTRL (F5).
DGPS corrections can be received
from different RACAL ground stations
via different satellites. Each satellite
sends this corrections by different
beams (Channels).
RTS Module (Racal)
The RTS Module (Racal) receives
DGPS corrections from RACAL
LandStar satellites. It is used for
Real-Time applications in the meter
or submeter accuracy range.
The module consists of a combined
GPS/LandStar antenna and a DGPS
radio receiver that is available in a
detachable housing.
To receive DGPS corrections from
the LandStar satellites a correspond-
ing license must be available.
Configuration
From CONFIGURE\ Interfaces
highlight Real-Time and press EDIT
(F3).
Press DEVCE (F5) to access the
device list. Select RTS Module
(Racal) and press CONT (F1) to
confirm.
Ensure that the Data Format is set to
RTCM 1, 2.