IAI America ERC3 User Manual
Page 290
Advertising
Chapter 4 Operation
4.5 Operation in MEC Mode 3 (T
est Run with Quick
Teach.)
280
Ɣ To Confirm Current Positioning Point Number.
Ɣ To Change Positioning Point Number.
Press STOP POS NUM Button.
Confirm a buzzer is made for 2 seconds and release the buttons.
If the current setting is 2-point stop
ĺ setting is changed to 3-point stop
If the current setting is 3-point stop
ĺ setting is changed to 2-point stop
2pnt Lamp should be illuminated when set to
2-point positioning.
3pnt Lamp should be illuminated when set to
3-point positioning.
Advertising