IAI America ERC3 - Manual (Page 68)

Chapter 1 Specifications Check
1.2 Specifications
1.2.1
Actuator
58
[7] Option
(1) With Brake (Model: B)
This is a function that is necessary when the actuator is mounted in the vertical orientation.
This prevents a drop of work piece or fixture attached on the actuator when the power or servo
is turned OFF.

(2) Home Reversed Type (Model: NM)
In the standard type, the home position is set on the motor end. This is a specification when an
indication is desired for the operation direction to be matched with the coordination system of
the device that the actuator is to be installed.
 
Caution: The home position is already adjusted when the product is shipped out from
our factory. When a change is desired to the home-reversed type after delivery,
it is necessary that you return the product to us for an adjustment. Contact our
sales office or an agent near you.
(3) Simple Absolute Type (Model: ABU)
It is not necessary to have a home-return operation every time the power is turned ON. PIO
Converter of Simple Absolute Type is required for this function, and it is available only when
the I/O type of the actuator is the serial communication type (Model Code: SE). [Refer to
Chapter 6]


(4) Flange (Model: FL)
It is an option for Rod Type. This is a metal component for flange to fix the unit on the rod side.
[Refer to 2.3 How to Install]

Flange Bracket


(5) Foot Brackets (Model: FT)
It is an option for Rod Type. It is a metal part to be attached on the bottom of the actuator to
affix with screws from top side. [Refer to 2.3 How to Install]
Foot Brackets